Sinbo SVC 3457 User Manual download pdf (Page 13)

- 12 -

CLEANING AND MAINTENANCE

1. Change the dust bag: When the wind indicator turns to be red, it is time to clear the

dust or replace with a new bag. (Fig.1)

• Open the front cover by clipping (Fig.2)

• Take out the bag holder then remove the full dust bag. (Fig.3)

Install the dust bag: Insert the dust bag into the bag holder and then put it in the slot

cabinet. (Fig.4)

If the dust bug is not installed, front cover can’t be closed.

2. Inlet Filter: Clean the filter with warm water once a year and you can install it after

dry. If the filter is damaged, a new filter should be replaced. (Fig.5)

3. Exchange the inlet filter: Clip down and remove the inlet cover by hands for exchange

of filter. (Fig.6)

4. Clean the filter: Open the outlet cover and take out the HEPA frame and filter. Wash

it and install it after dry. (Fig.7/8)

Keep instructions for future reference.

The crossed out wheelie bin symbol on this item indicates that this appliance

needs to be disposed of in an environmentally friendly way when it becomes of

no further use or has worn out. Contact your local authority for details of where

to take the item for re-cycling.

Caution:

If the supply cord is damaged, it must be replaced by the manufacturer, its service agent

or similarly qualified persons in order to avoid a hazard.

This appliance is not intended for use by persons (including children) with reduced

physical, sensory or mental capabilities, or lack of experience and knowledge, unless

they have been given supervision or instruction concerning use of the appliance by a

person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 44 45

No comments

Sinbo SVC 3457 User Manual Page 13