Sinbo SJ 3137 User Manual download pdf (Page 10)

- 9 -

ATTENTIONS

perosn(including children), unless under the direction or help from the person who have

the responsibility for security. Children should be overseen, so it can be testified that

they are not playing with it.

2. Before using, put this machine on a stable and even table board, operate according

to the above methods.

3. Before juicing, first confirm juicing net and rotor clutched in position, and no hard

contact between juicing net cutter and transparent cover. Put the transparent cover on,

fasten tight the handle, then turn on the machine.

4. Before being used, the motor works in running-in phase, there may be slight peculiar

smell and spark, this is normal, after the motor works for some period, the above

phenomenon will disappear.

5. During juicing, make sure there is not too full juice and residue in the middle seat and

residue cup, if too full, please cut off power supply, clean up, then use again.

6. During using, do not open the cup cover. In case power supply is on, do not put hand

or any ware into the mixing cup or feed port, otherwise, harmful accident may occur or

this machine may be damaged.

7. In order to prolong service life of this machine, over-temperature protective device

is mounted in the motor. If the motor works for a long time or overloaded, when over

warning temperature, power supply will automatically cut off. After the motor stops, pull

out plug of power supply, wait for the motor to cool (about for 30 min), use again.

8. During operating, please do not leave, never let children operate this machine.

9. When this machine works in mixing, mincing or grinding conditions, no-loaded or over

loaded work is strictly prohibited.

10. After operation, do not pour the food out until pull out the plug of power supply.

11. Cutters are very sharp, in order to avoid danger, when cleaning a cutter, please put

the cutter under water tap for washing, do not wash it with hand.

12. This machine must not be used for others beyond regulated purposes.

13. In case of damaged power supply cord, in order to avoid danger, replacement must

be performed by the manufacturer or its service department or similar professional

persons.

MAINTENANCE AND CLEANING

1. This machine shall be often used, so as to keep the motor dry and clean.

2. If not using for a long time, please store this machine at a dry and well-ventilated

place so as to prevent the motor from being damped and going moldy.

3. No washing the main machine. When cleaning, only wipe with wet cloth. Other

components may be washed directly with water, such as pushing bar, cover, middle seat,

residue cup, juice nozzle cover.

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 36 37

No comments

Sinbo SJ 3137 User Manual Page 10